Mobility allowance in construction in Belgium: PC 124 rates and a worked week

Construction crew climbing into a company van at the depot before driving to the site

Status on 22 October 2026: the PC 124 mobility allowance per km is unchanged in 2026 and is not indexed.

The mobility allowance in construction in Belgium is a daily payment per km for workers under joint committee 124 (PC 124).

It is due once a worker travels at least 10 km a day, there and back. The rate depends on the distance band and on the worker’s role.

The hard part is not the rate. It is knowing how far every worker travelled each day, and in which seat.

Below you find the 2026 rates, the rules per role, a worked week for one crew and the records you need.

How the mobility allowance works in construction in Belgium

Construction workers under PC 124 get two separate travel payments from their employer.

Both come from the sector agreement (CAO) of 30 September 2019 on travel costs, amended on 26 June 2023.

PaymentWhen it is dueHow it is calculated
Weekly travel-cost refundFrom the first kmBarema A (train) or Barema B (other transport), adjusted when rail fares change; current tables from 1 February 2026
Daily mobility allowanceRound trip of at least 10 km that dayA rate per km on every km travelled, by distance band and role

This guide is about the second payment, the daily mobility allowance (mobiliteitsvergoeding).

Once a worker reaches 10 km in a day, the allowance is paid on every km, not only on the km above 10.

It is also due when you provide the vehicle. The km then count for the whole route from the pick-up point.

Note: the weekly Barema B refund and the daily mobility allowance are two payments with two different tables. Never use Barema B amounts as mobility allowance rates.

The calculation is simple once the registration is right.

That is why we treat the allowance as part of time tracking for field teams: the km and the role come from the same record as the hours.

PC 124 mobility allowance rates per km in 2026

The rate per km depends on the total distance a worker travels that day, there and back, and on how they travel.

Daily round tripPassenger or own transport (EUR per km)Driver alone in a company vehicle (EUR per km)
0 to 59 km0.06190.1000
60 to 77 km0.06760.1060
78 to 103 km0.07000.1085
104 to 129 km0.07240.1110
130 to 155 km0.07730.1162
156 to 207 km0.08180.1209
208 to 259 km0.08440.1236
260 km and more0.08680.1261

The driver-alone rates apply since 1 September 2023. None of the per-km amounts changed in 2026.

A driver who carries colleagues in your vehicle outside working hours gets a flat EUR 0.1579 per km instead.

A worker who takes the train gets EUR 0.0870 per km on the rail ticket.

The band sets the rate for every km of that day.

A passenger with a 60 km round trip gets 60 x EUR 0.0676 = EUR 4.06. A driver with colleagues gets EUR 9.47 for the same trip.

Driver or passenger: which rate applies?

The role decides the rate, so record it per worker and per day. The sector agreement gives four cases:

  1. Passenger, or own transport: the band rate in the first column of the table.
  2. Driver alone in a company vehicle: the higher band rate, only when you asked them to drive and no collective transport is possible.
  3. Driver who carries colleagues in your vehicle outside working hours: a flat EUR 0.1579 per km from the first km, for the whole trip, including the legs driven alone.
  4. Driver without colleagues who does not meet the driver-alone conditions: the passenger rate.

A trip of more than 2 hours needs two drivers.

A worker who cycles gets a bicycle allowance instead of both travel payments.

Tip: decide who drives when you plan the crew, not afterwards. A van that leaves the depot with one driver and two passengers produces three different records for payroll.

A worked week for one crew

Here is one example week, calculated with the 2026 rates above.

The crew is Jan, who drives the company van, and two colleagues who ride along. The setup:

  • Jan takes the van home. He drives 8 km to the depot each morning and 8 km back each evening: 16 km a day on top of the site trip.
  • His two colleagues meet him at the depot, the pick-up point, so their km start there.
  • Monday and Tuesday the crew works on site A, Wednesday and Thursday on site B, Friday on site C.
DayPassenger round tripBandRatePer passengerJan’s kmJan at EUR 0.1579
Monday52 km0 to 590.0619EUR 3.2268EUR 10.74
Tuesday52 km0 to 590.0619EUR 3.2268EUR 10.74
Wednesday84 km78 to 1030.0700EUR 5.88100EUR 15.79
Thursday84 km78 to 1030.0700EUR 5.88100EUR 15.79
Friday136 km130 to 1550.0773EUR 10.51152EUR 24.00
Week408 kmEUR 28.71488 kmEUR 77.06

For the whole crew, that is EUR 134.48 in mobility allowance for the week.

The weekly travel-cost refund comes on top and is not in these figures.

What this example shows:

  1. The band moves every day. The same passenger earns EUR 0.0619 per km on Monday and EUR 0.0773 on Friday, because the round trip changes band.
  2. The driver’s rate covers his own legs. Jan’s 16 km between home and depot are paid at EUR 0.1579 too, because the flat rate covers the whole trip.
  3. The role is worth real money. Without colleagues, and without meeting the driver-alone conditions, Jan would get the passenger rate: EUR 34.95 instead of EUR 77.06.

This example leaves out how the passengers reach the depot. Check that part with your social secretariat.

Is travel time working time in construction?

No. Under the PC 124 travel agreement, travel time is not working time.

The driver’s higher rate is a flat compensation for driving colleagues outside working hours.

It is not a wage for the time behind the wheel.

We found no sector rule that pays travel time as wages. Check any company or site agreement you made yourself.

Keep travel and site hours apart in your registration, because overtime on site follows its own construction rules.

Royal decree no. 213 allows up to 1.5 extra hours a day (9.5 hours a day) and 130 hours a calendar year.

With the agreement of the union delegation, or an accession protocol signed by at least one worker, that limit goes up to 180 hours in the summer period or a period of intense activity.

The worker chooses payment with a 20% supplement (Saturday always 50%) or time off.

The mobility day: one paid day off after 28,500 km

From 2026, a worker paid mobility allowance on at least 28,500 km in the previous calendar year gets one paid day off.

That threshold, down from 30,000 km, comes from the 2025-2026 sector agreement.

As an example: a 130 km round trip on 220 working days adds up to 28,600 km, which qualifies.

A 52 km round trip on the same number of days does not.

You can only tell who qualifies if you add up every paid km per worker over the year. On paper logs, that total is the first thing to go missing.

What records do you need to keep?

Each month, you give every worker a written breakdown with the km per day.

To produce it without a paper log, every day needs five data points:

  1. Who travelled, identified in the vehicle or in an app.
  2. The pick-up point and the site.
  3. The role: driver with colleagues, driver alone, or passenger.
  4. The round-trip km, which sets the band.
  5. The export of km and role to payroll or your social secretariat.
Construction worker holding a badge to the reader in a company van to register the trip

This is how it works at Cibor, a firm in leak detection, building repair and concrete work.

Its concrete workers identify themselves with a badge when they get into the vehicle. The box in the vehicle registers and transmits the trip.

Its technicians on the road log their travel time in an app. Payroll for mobility allowances now runs considerably better, as the Cibor time registration case describes.

A common objection is "our foremen already keep a log". A complete paper log is fine.

The problem is the work after it: retyping every day, picking the band, checking the role, building the monthly breakdown.

With trip and vehicle registration, the km come in every day instead of at the end of the month.

Note: if you use vehicle location to measure the km, the Belgian Data Protection Authority asks for a written policy, prior information to workers, an off switch outside working hours and no permanent tracking.

The same registration also feeds absences and site attendance for Check-in at Work.

Comparing tools for that? Our guide to absence management software for field teams lists what to check.

FAQ

Is the mobility allowance the same as the mobility budget?

No. The mobility allowance in this guide comes from the PC 124 travel agreement. The mobility budget is a different scheme, which this guide does not cover.

Is the PC 124 mobility allowance indexed?

No. The per-km amounts are unchanged in 2026; only the weekly travel-cost refund follows rail fares.

Does a worker who cycles to the site get the mobility allowance?

No. A worker who cycles gets a bicycle allowance instead of both travel payments.

Get the km out of the registration, not the paper log

Start with one crew and one month.

Record who drove, who rode along and the round trip per day. Then compare the result with what payroll paid.

The gap tells you whether a digital registration is worth it for your company.

For the full picture of time registration for teams on site and on the road, download our free guide Make Every Hour Count.

Cool stuff

Service technician unloading tools from a van at a customer's house early in the morning

18/11/2026

Flexitime in Belgium: the rules, the registration and a worked week

Field technician loading tools into a van at a building site at the end of a long working day

13/11/2026

Overtime in Belgium: limits, pay and recovery rest, with a worked month

Suivo illustration for what does time registration cost in belgium?: a frosted-glass 3D scene on a cool blue-grey background, with an amber registration ring as the focal point.

05/11/2026

What does time registration cost in Belgium?