Status on 22 October 2026: flexitime is governed by art. 20ter of the Labour Act of 16 March 1971, inserted by the Law of 5 March 2017 on workable and agile work. A general duty to register working time for every employee is planned, not law.
Flexitime in Belgium (glijdende uren) lets workers choose when they start and finish, around fixed core times. No day may exceed 9 hours and no week 45 hours, and the normal weekly hours must be met on average over a reference period.
You need two things before the first flexible week: a CAO or work rules that set it out, and a daily registration of hours per worker.
This guide covers the limits, a sample clause for your work rules, the registration and a worked week for a field technician.
What is flexitime?
Flexitime is a schedule with two kinds of time.
- Core times (stamtijden): the hours when everyone must be present or available.
- Flexible times (glijtijden): the band around them in which each worker chooses when to start and stop.
Workers can work longer on some days and shorter on others. Over the reference period, the hours must average out to the normal working week.
Flexitime is not the same as a flexi-job. A flexi-job is a separate employment status with its own rules, covered in our guide to time registration for flexi-jobs.
Flexitime rules in Belgium: the limits
The rules sit in art. 20ter of the Labour Act and apply to every flexible schedule.
| Rule | Limit |
|---|---|
| Hours per day | At most 9 |
| Hours per week | At most 45 |
| Average | The normal weekly working time, on average over the reference period |
| Reference period | 3 calendar months by default; up to 1 year if a CAO or the work rules say so |
| Carry-over | Up to 12 hours surplus or deficit to the next period (a CAO can raise this) |
| Force majeure | Hours lost to force majeure can be made up within 3 months after the period |
These figures come from the Labour Act as explained by the federal employment ministry (FOD WASO).
Hours worked within these limits are not overtime and carry no overtime pay.
Note: 9 hours a day and 45 a week are caps inside the flexitime scheme. They are not the point where overtime starts.
What must the work rules say?
Flexitime is introduced by a CAO or by the work rules (arbeidsreglement).
The CAO or work rules must state the core times, the flexible times, the reference period, the hours above or below the average week, and the maximum carry-over.
The detailed rules go in an annex to the work rules.
Here is a sample clause, built on those required points. It is an example: have your social secretariat or lawyer check it before you use it.
- Scope: this flexible schedule applies to the service technicians and site supervisors named in annex 1.
- Core times: Monday to Friday from 9:00 to 15:00, with a lunch break between 12:00 and 13:30.
- Flexible times: start between 6:30 and 9:00; finish between 15:00 and 18:30.
- Limits: at most 9 hours a day and 45 hours a week.
- Average: the normal weekly working time of 38 hours is respected on average over the reference period.
- Reference period: each calendar quarter.
- Carry-over: at most 12 hours surplus or 12 hours deficit move to the next quarter.
- Registration: each worker registers start, breaks and end every day. The worker can see their running plus or minus balance at any time.
- Force majeure: hours lost to force majeure can be made up within 3 months after the quarter.
The 38-hour week and the times in this clause are examples. Your sector and your contracts set the real figures.
Is time registration mandatory with flexitime?
Yes. An employer with flexitime must run a time-registration system (tijdsopvolging).
It records, per worker and per day, who worked and for how long.
What the law asks of that registration:
- Per worker, per day: identity and duration of work, plus start, end and breaks for part-timers on a fixed schedule.
- Any format: electronic recording is not required. Paper can be enough if it is complete.
- Five years: you keep the records for 5 years.
- Open: the worker and the labour inspectorate can consult them.
- A visible balance: the worker must be able to see their running plus or minus balance.
All five points come from the same flexitime rules.
Check point 5 in any tool you use: a balance that only HR can see does not meet it.
A general duty to register working time for all employees is a separate matter. The government plans one, targeting 1 January 2027, with time until 31 March 2027 for employers without a suitable system.
It is a preliminary draft bill: not voted, not published, and details can change.
If you run flexitime, you already have the duty today, whatever happens to that plan.
A worked week for a field technician
Take Pieter, a service technician on the sample clause above. His normal week is 38 hours, so his average day is 7 hours 36 minutes.
| Day | Start | End | Break | Worked | Day vs 7:36 | Running balance |
|---|---|---|---|---|---|---|
| Monday | 7:00 | 16:30 | 0:30 | 9:00 | +1:24 | +1:24 |
| Tuesday | 7:30 | 16:00 | 0:30 | 8:00 | +0:24 | +1:48 |
| Wednesday | 8:00 | 15:30 | 0:30 | 7:00 | -0:36 | +1:12 |
| Thursday | 6:45 | 16:15 | 0:30 | 9:00 | +1:24 | +2:36 |
| Friday | 8:30 | 15:00 | 0:30 | 6:00 | -1:36 | +1:00 |
| Week | 39:00 | +1:00 |
Checked against the limits, this week is fine.
- No day above 9 hours. Monday and Thursday hit the cap exactly.
- The week stays under 45 hours. Pieter worked 39.
- Core times are covered. Every day runs through 9:00 to 15:00.
- The balance moves to the next week. Pieter starts Monday at +1:00.
Now a different Thursday. A boiler job runs late and Pieter works 9 hours 45 minutes.
Those last 45 minutes fall outside the flexitime limits, so the scheme does not cover them. Check with your social secretariat how your sector treats them.
The balance matters most near the end of the quarter. Only 12 hours may move to the next period.
If Pieter stands at +15 hours two weeks before the quarter ends, plan shorter days now. Waiting until the last week leaves no room.
Does flexitime work for construction crews?
It works best for people who start alone: service technicians, site supervisors, planners and maintenance staff.
A crew that travels together in one van starts together. For them, a fixed schedule is usually simpler than individual flexible times.
Field teams do change how you register. Nobody passes a time clock at the office door, so the registration has to travel with the worker.
That means a phone app, a badge in the vehicle or a check-in pole on site. Our time tracking for field teams supports all three and brings hours and absences into one validation dashboard for payroll.
Absences belong in the same record, so a day of leave or sickness is not read as a short day. See how to track absences and holidays in one system.
Construction crews also have travel payments to register. Our guide on travel payments for construction workers explains that part.
FAQ
Can you work 9 hours a day in Belgium with flexitime?
Yes. Within a flexitime scheme, a day can run to 9 hours, as long as the week does not exceed 45 hours and the average is met.
Does registration have to be electronic?
No. Electronic recording is not required. The records must be complete, kept for 5 years and open to the worker and the inspectorate.
Do extra flexitime hours earn overtime pay?
No. Hours worked within the flexitime limits are not overtime and carry no overtime pay.
Set up the registration before the first flexible week
Write the clause, agree it in a CAO or the work rules, and decide how each worker registers start, breaks and end.
Then test it for one month with a few technicians. Check that each of them can see their own balance.
For a practical overview of digital time registration for teams on site and on the road, download our free guide Make Every Hour Count.